PRODUCT OVERVIEW
Thermal spraying techniques are coating processes in which melted
(or heated) materials are sprayed onto a surface.The "feedstock" (coating precursor) is heated by electrical (plasma
or arc) or chemical means (combustion flame).Thermal spraying can
provide thick coatings (approx. thickness range is 20 micrometers
to several mm, depending on the process and feedstock), over a
large area at high deposition rate as compared to other coating processes such aselectroplating, physical and chemical vapor
deposition. Coating materials available for thermal spraying include metals,alloys, ceramics, plastics and composites. They are
fed in powder or wire form, heated to a molten or semimolten state
and accelerated towards substrates in the form of micrometer-size
particles.
Combustion or electrical arc discharge is usually used as the
source of energy for thermal spraying. Resulting coatings are made
by the accumulation of numerous sprayed particles. The surface may
not heat up significantly, allowing the coating of flammable
substances.
Coating quality is usually assessed by measuring its porosity,
oxide content, macro and micro-hardness, bond strength andsurface
roughness. Generally, the coating quality increases with increasing
particle velocities.
Bond coats applied using electric arc wire spray are very clean and
more easily machined than their powder-sprayed counterparts. Wires
are popular for machine element repair, most commonly on carbon
steel, low-alloy steel, and stainless-steel substrates.
Typical Application for 0Cr20Ni80(Tafa 06C) Thermal Spray Wire:
1. Infrastructure such as bridges, trestles, water towers, wind
turbines, pipelines
2. Marine and offshore applications, such as bridges, hulls for
ships and tankers, offshore wind turbines
3. Corrosion Under Insulation (CUI)
Boilers and Digesters
| Product | Chemical Composition | Available Sizes | Comparable Products | Hardness and Bond Strength | Typical Characteristics and Applications |
| Name |
| NiAl95/5 | Nickel Aluminum | 1.6mm, 2.0mm | Tafa 75B Bond Arc® | 78 Rb | High temperature resistance |
| Bond Arc® | Metco 8400 | 9746 PSI | Oxidation and abrasion resistant |
| Ni 5Al | Metco 450 | | Dense coatings |
| NiCr80/20 | Nickel Chrome | 1.6mm, 2.0mm | Tafa 06C | 90 Rb | Machinable |
| Ni 80 Cr 20 | Praxair 80/20 | 7324 PSI | Heat Oxidation Resistance |
| Metco Nickel #33 | | Oxygen barrier under ceramic coatings |
| Monel 400 | Monel | 1.6mm, 2.0mm | Tafa 70T | 80-84 Rb | Marine corrosion protection |
| Ni 27 Cu 2.0Fe 1.5Mg | Praxair Monel | 4307 PSI | Print rolls |
| Metco Monel | | |
| NiAl80/20 | Nickel Aluminum | 1.6mm, 2.0mm,
3.17mm | Tafa 79B | 55-80 Rb | High temperature resistance |
| Ni 20Al | Metco 405-1 | | Oxidation and abrasion resistant |
| Metco 405, 405NS | 8949 PSI | Dense coatings |
NiCr80/20 Thermal Spray Wire(Tafa 06C) Chemical Composition:
Mechanical Properties:
| Coating Hardness | HRB 92 |
| Bonding Strength | 7324 PSI |
| Deposit Rate | 11 lbs/hr/100A |
| Condition | Solid Wire |
| Diameter | 1.6mm(14 ga),3.2mm |
| Package Size | 10kg,15kg,customized as client’s demand |
Specification of wire: 1.6mm, 3.2mm, 15kg/spool
Products&Package:
