ANSI standard Type E 4x0.8mm Chromel/Constantan alloy wire
Thermocouple extension Cable
TYPE E (CHROMEL vs Constantan) may be used in oxidizing, inert or dry reducing atmospheres, or
for short periods of time under vacuum. Must be protected from
sulfurous and marginally oxidizingatmospheres. Produces the highest
EMF per degree o any standardized thermocouple.
1. Chemical Composition
| Material | Chemical composition (%) |
| Ni | Cr | Cu | Mn | Al |
| EP(Chromel) | 90 | 10 | | | |
| EN(Constantan) | 45 | | 55 | | |
2. Physical properties and Mechnical properties
Material |
Density(g/cm3) |
Melting point℃) |
Tensile Strength(Mpa) |
Volume resistivity(μΩ.cm) |
Elongation rate (%) |
| EP(Chromel) | 8.5 | 1427 | >490 | 70.6(20℃) | >25 |
| EN(Constantan) | 8.8 | 1220 | >390 | 49.0(20℃) | >25 |
3. EMF Value range at different temperature
| Material | EMF value Vs Pt(μV) |
| 100℃ | 200℃ | 300℃ | 400℃ | 500℃ | 600℃ |
| KP(Chromel) | 2769~2859 | 5921~6019 | 9272~9374 | 12709~12819 | 16144~16282 | 19537~19699 |
| EN(Constantan) | 3499~3561 | 7389~7513 | 11647~11779 | 16109~16255 | 20699~20885 | 25362~25588 |
| EMF value Vs Pt(μV) |
| 700℃ | 800℃ | 900℃ | 1000℃ | 1100℃ |
| 22859~23043 | 26102~26308 | | | |
| 30030~30292 | 34664~34960 | | | |
Specifications
1.Style:Extension Wire
2.Thermocouple copper wire
Thermocouple copper wire Classification
1. Thermocouple level (high temperature level). This type of
thermocouple wire is mainly suitable for thermocouple type K, J, E,
T, N and L and other high temperature detection instrument,
temperature sensor, etc.
2. Compensating wire level (low temperature level). This type of
thermocouple wire is mainly suitable for compensating cable and
extension wire of various thermocouples of type S, R, B, K, E, J,
T, N and L, heating cable, control cable and so on.
Thermocouple variety and index
Thermocouple Variety and Index |
Variety |
Type |
Measurement Range(°C) |
NiCr-NiSi |
K |
-200-1300 |
NiCr-CuNi |
E |
-200-900 |
Fe-CuNi |
J |
-40-750 |
Cu-CuNi |
T |
-200-350 |
NiCrSi-NiSi |
N |
-200-1300 |
NiCr-AuFe0.07 |
NiCr-AuFe0.07 |
-270-0 |
3 . Dimensions and Tolerance of Fiberglass Insulated Thermocouple
Wire
Dimensions / Tolerance mm ) : 4.0+-0.25
Color code & initial calibration tolerances for thermocouple wire:
| Thermocouple Type | ANSI Color Code | Initial Calibration Tolerances |
| Wire Alloys | Calibration | +/-
Conductor | Jacket | Temperature Range | Standard
Limits | Special
Limits |
CHROMEL(+) vs.
ALUMEL(-) | K | Yellow/Red | Brown | -200°C to -110°C
-110°C to 0°C
0°C to +285°C
285°C to +1250°C | ± 2%
±2.2°C
±2.2°C
± .75% | ±1.1°C
± .4% |
Color Code & Initial Calibration Tolerance for Extension Wire:
| Extension type | ANSI Color Code | Initial Calibration Tolerances |
| Wire Alloys | Calibration | +/-
Conductor | Jacket | Temperature Range | Standard
Limits | Special
Limits |
| Iron (+) vs. Constantan(-) | JX | White/Red | Black | 0°C to +200°C | ±2.2°C | ±1.1°C |
| CHROMEL (+) vs. ALUMEL (-) | KX | Yellow/Red | Yellow | 0°C to +200°C | ±2.2°C | ±1.1°C |
| Copper(+) vs. Constantan(-) | TX | Blue/Red | Blue | -60°C to +100°C | ±1.1°C | ± .5°C |
| CHROMEL(+) vs. Constantan(-) | EX | Purple/Red | Purple | 0°C to +200°C | ±1.7°C | ±1.1°C |
PVC-PVC Physical Properties:
| Characteristics | Insulation | Jacket |
| Abrasion Resistance | Good | Good |
| Cut Through Resistance | Good | Good |
| Moisture Resistance | Excellent | Excellent |
| Solder Iron Resistance | Poor | Poor |
| Service Temperature | 105ºC continuous 150ºC single | 105ºC continuous 150ºC single |
| Flame Test | Self-extinguishing | Self-extinguishing |
Products&Package:
Payment&Shippment:
Produce video:
https://www.youtube.com/watch?v=_i2cfZUHka4
https://www.youtube.com/watch?v=BqSjyC15Jk4
Sales Manager:Michaeal Qiu.
What's App:+86 13795230939
Tel:+86-21-66796338 Mobile Phone: +86 13795230939
