High temperature and low temperature resistance, excellent
electrical insulation, excellent chemical stability, high voltage
resistance, aging resistance, long service life. Soft and easy to
install.Features/Uses:
Application:
Widely used in the petroleum industry, with excellent temperature
resistance, oil resistance, cold resistance.
Delivery requirements:
Short delivery of not less than 10 m is allowed as agreed in the
contract. The quantity shall not exceed 10% of the total delivered
length.
Specification structure and technical parameters :(common type)
Nominal conductor section (mm²) | Conductor structure root number/ single wire diameter | Insulation thickness (mm) | The average diameter (mm) | The maximum resistance of a conductor at 20 ℃ (Ω/km) | The length of the packing (m) |
| 0.2 | 1x0.50 | 0.65 | 1.80 | 95 | 500 |
| 12x0.15 | 0.60 | 1.80 | 95 | 500 |
| 0.3 | 16x0.15 | 0.60 | 1.85 | 71.2 | 500 |
| 0.4 | 23x0.15 | 0.50 | 1.85 | 49.6 | 200 |
| 0.5 | 28x0.15 | 0.60 | 2.20 | 40.1 | 200 |
| 0.75 | 42x0.15 | 0.70 | 2.60 | 26.7 | 200 |
| 1.0 | 32x0.20 | 0.70 | 2.80 | 20.0 | 200 |
| 1.5 | 48x0.25 | 0.70 | 3.10 | 13.7 | 100 |
| 2.5 | 49x0.25 | 0.80 | 3.70 | 8.21 | 100 |
| 4.0 | 56x0.30 | 0.80 | 4.30 | 5.09 | 100 |
| 6.0 | 84x0.30 | 0.80 | 5.20 | 3.39 | 100 |
| 10 | 84x0.40 | 1.00 | 6.80 | 1.95 | 100 |
| 16 | 126x0.40 | 1.20 | 8.40 | 1.24 | 100 |
| 25 | 196x0.40 | 1.40 | 10.40 | 0.795 | 100 |
According to the technical agreement between the two parties, we
can produce products of other specifications.
Fluorine rubber
Main properties and applications of fluorine rubber from the main
chain structure, fluorine rubber can be divided into three basic
types: fluorine carbon rubber, fluorine silicone rubber, Fluorinated phosphorous nitrile rubber.
1. Oil, solvent and chemical resistance
Compared with methyl vinyl silicone rubber, fluorine silicone
rubber has excellent oil, solvent and chemical resistance. Even
compared with fluorine rubber, oil and solvent resistance is good.
Under the same medium, temperature, time, impregnation after all
showed excellent durability, fluorine and silicone rubber is
perhaps the only a - 68 ℃ ~ 232 ℃ under the nonpolar medium
resistance of the elastomer. Fluorosilicone rubber also has good
methanol-containing gasoline resistance. Even in the
gasoline/methanol mixture system, its vulcanizate hardness, tensile
strength, volume change is very small, after a 500h long immersion
test, the physical properties have almost no change.
2. Heat resistance
The pyrolysis of fluorosilicone rubber is the same as that of
silicone rubber, i.e. side chain oxidation, main chain fracture,
side chain thermal decomposition and various compound reactions.
Due to the main chain of the breakdown products can also cause
fracture, so heat resistance is less than silicone rubber, usually
under the temperature of 200 ℃ has started to oxidative aging. But
by adding iron, titanium and rare earth oxides can make them get a
small amount of heat stabilizer improved significantly, even at 250
℃ high temperature also has enough heat resistance. The effect of
temperature on fluorosilicone rubber is larger than that of
silicone rubber, but smaller than that of fluorosilicone rubber.
Also studied abroad fluorine silicone rubber in 150 ℃, 175 ℃ x 5000
x 2000 h h, under the condition of 200 ℃ x 4000 h life, the result
is second only to methyl vinyl silicone rubber.
3. Cold tolerance
Fluorine silicone rubber and ordinary silicone rubber, low
temperature performance is good. Since fluorosilicone rubber is a
linear polymer composed of soft si-o main chain, its low
temperature characteristics are better than fluorosilicone rubber
with c-c main chain. Among them, the fluorine and silicone rubber
(LS - 2370 - u) better low temperature properties, low brittleness
temperature - 89 ℃, and the general fluorine rubber was about to 30
℃.
4. Electrical performance and radiation resistance
The electrical properties of fluorosilicone rubber are similar to
that of ordinary silicone rubber, but the special value of
fluorosilicone rubber is that it changes little under the harsh
conditions of high temperature, low temperature, humidity, oil,
solvent, chemicals, ozone and so on. The radiation resistance of
fluorine silicone rubber is not outstanding, but it is better than
methyl vinyl silicone rubber.
5. Physical and mechanical properties
Fluorosilicone rubber and ordinary silicone rubber, vulcanized
rubber mechanical strength (especially tear strength) is relatively
low. Therefore, improving the strength of fluorosilicone rubber is
also an important research topic.
6. Other features
Fluorosilicone rubber has excellent anti-aging resistance, which
can keep good performance even after 5 years of exposure. Ozone is
one of the most produced gases during elastomer aging, but no
cracks or cracks were found in fluorosilicone rubber after dynamic
or static tests. In addition, the mildew resistance, physiological
inertia, anticoagulation of fluorosilicone rubber is also very
good.
