20*20*1000mm C18150 /CuCr1Zr Square rod
Product brief introduction
CuCr1Zr – UNS.C18150 Chromium Zirconium Copper C18150 is an excellent and unique copper
alloy with high electrical conductivity, hardness, and ductility,
moderate strength, and excellent resistance to softening at
elevated temperatures. The addition of 0.1% zirconium (Zr) and 1.0%
chromium (Cr) to copper results in a heat treatable alloy which may
be solution treated and subsequently aged to produce these
desirable properties. Rod is usually supplied from the mill in the
fully aged and drawn condition so no further heat treatment is
required by the fabricator. The softening temperature of properly
heat treated C18150 rod exceeds 500°C as compared to unalloyed pure
copper which softens at 200°C, and silver bearing coppers which
soften at 350°C.
Furthermore, many evidences shows that C18150 can provide less
sticking and resisting deformation longer than its C18200
counterpart in some specific situatons.
Detailed Product Description
CuZr UNS.C15000
CuNi2CrSi UNS.C18000
CuCr1Zr UNS.C18150
CuCr UNS.C18200
Chemical Compositon
| UNS/DIN | DIN/EN | International specification | Chemical composition | Avaliable forms |
| C15000 | CuZr | 2.1580 CW120C | Zr:0.15-0.20% Cu:balance Cu+Zr:99.5%min | bar,round bar,flat bar,square bar,rectangular bar,hexagon
bar,plate,round wire. |
| C18000 | CuNi2CrSi | 2.0855 CW111C | Cr:0.10-0.80% Ni:1.80-3.0% Si:0.40-0.8% Cu:balance Cu+Cr+Ni+Si:99.5%min | bar,round bar,flat bar,square bar,rectangular bar,hexagon
bar,plate,round wire. |
| C18150 | CuCr1Zr | 2.196 CW106C | Cr:0.50-1.50% Zr:0.05-0.25% Cu:balance Cu+Cr+Zr:99.5%min | bar,round bar,flat bar,square bar,rectangular bar,hexagon
bar,plate,round wire. |
| C18200 | CuCr | 2.1291 CW105C | Cr:0.60-1.20% Cu:balance Cu+Cr:99.5%min | bar,round bar,flat bar,square bar,rectangular bar,hexagon
bar,plate,round wire. |
Available Sizes:
Custom Diameter & Sizes, Random Mill lengths
Available Products (forms):
Round bars, Round strips, Round wires, Round tube,
Flat bars, Square bars, Rectangular bars, Hexagon bars, Plates,
Sheets, Coils
Custom shapes are available upon request.
Typical Application
Electrical Industry: Electrical Switch and Relay Blades, Fuse Clips, Switch Parts,
Relay parts, Connectors, Spring Connectors, Contact Bridges,
Belleville Washers, Navigational Instruments, Clips
Fasteners: Washers, Fasteners, Lock Washers, Retaining Rings, Roll Pins,
Screws, Bolts
Industrial: Pumps, Springs, Electrochemical, Shafts, Non Sparking Safety
Tools, Flexible Metal Hose, Housings for Instruments, Bearings,
Bushings, Valve Seats, Valve Stems, Diaphragms, Springs, Welding
Equipment, Rolling Mill Parts, Spline Shafts, Pump Parts, Valves,
Bourdon Tubes, Wear Plates on Heavy Equipment, Bellows etc.
International Specification:
Rods/Bars/Tubes: ASTM B196,251,463; SAE J461,463; AMS
4533,4534,4535; AMS4650,4651;
RWMA Class 4
Strips: ASTM B194, AMS4530,4532; SAE J461,463
Sheets: ASTM B194
Wires: ASTM B197, AMS4725, SAE J461,463
Plates: ASTM B194, SAE J461,463; AMS4530,4533,4534,AMS4650,4651;
RWMA Class 4.
